|
Page 1 of 2 pages [ 2 ] 
.jpg) |
|
For cutting granite, marble, porcelain, single and double fired, bricks, cement, etc… Straight, 45° bevel (Jolly) & plunge cuts. |
|
 |
|
|
|
|
 |
|
For cutting granite, marble, porcelain, single and double fi red, bricks, cement, etc… Straight, 45° bevel (Jolly) & plunge cuts. |
|
|
|
|
|
|
 |
|
For cutting bricks, granite, marble, porcelain, double-single fired, etc. |
|
|
|
|
|
|
 |
| • For cutting single-double fired and porcelain. |
|
|
|
|
|
|
 |
|
Cut thicker material such as brick, natural stones, cement block, etc. |
|
|
|
|
|
|
.jpg) |
|
For cutting tiles, marble, granite, bricks, cement, etc straight and 45º bevel (jolly)
Maximum length of cut: 80cm (31½”)
Maximum width of cut: 60cm (23 5/8 “)
Maximum thickness of cut single pass: 120mm (4¾) – double pass: 170mm (6 5/8”)
Aluminium framework · Adjust depth of cut manually or by foot operation with pedal
Tilting motor assembly 0 – 45 º)
Maximum blade: 350mm (14”); minimum blade 300mm (12”)
Belt driven system optimises motor torque and cutting capacity , gear ratio of motor to disc 1,4 ÷ 1 drive belt type poly V
Heavy duty pump and jet nozzles provide superior blade cooling
Removable polypropylene tank for easy cleaning. |
|
|
|
|
|
|
 |
|
For cutting porcelain, single and double fired, marble, granite and bricks. |
|
|
|
|
|
|
.jpg) |
|
For cutting porcelain, single and double fired, marble, granite and bricks straight 45° bevel (jolly) & plunge cuts
Maximum length of cut 105cm (41 ¾)
Maximum thickness of cut: 80mm (3”) in single pass; 150mm (6”) in double pass
Adjusting cutting depth
Pivoting blade guard remains parallel with tile to ensure maximum cutting depth
Maximum blade diameter 250mm (10”)
Gear to ratio of motor to blade = 1. |
|
|
|
|
|
|
 |
|
For creating 45 degree bevels (Jolly) on multiple tiles simultaneously. |
|
|
|
|
|
|
 |
|
For cutting porcelain, single-double fired, marble, granite; Straight, 45° bevel (Jolly) cuts, square e round knockouts, sanding,/polishing;
Unlimited size of cut;
Maximum thickness of cut: 25 mm(1") in single pass; 50 mm (2") in double pass;
Maximum disc: Ø115 mm (4½");smallest blade: Ø100 mm (4");
Gear ratio of motor to disc 1÷2. |
|
|
|
|
|
|
Page 1 of 2 pages [ 2 ] |
